Measure each room's length and width in feet, multiply them, add the rooms together, then add a waste allowance for cuts: more for diagonal, herringbone and large tile than for a straight plank layout. The calculator below does the math, rounds up to whole boxes, and also counts underlayment rolls and quarter round for the same rooms.
Estimates only. Floating floors and tile can't run under fixed cabinets, so measure open floor. Final quantities come from the in-home measurement.
How do you measure a room for new flooring?
Measure the longest length and the widest width of each room at floor level, in feet, and round each up to the next half foot. For an L-shaped room, split it into two rectangles and enter both. Include closets that get the same floor. Leave out the area under kitchen cabinets and islands for floating floors and tile; our guide on flooring under cabinets and appliances explains why.
How much extra flooring should you buy?
The extra covers cut-offs at walls, doorways and tile edges, plus a few spares. The calculator starts at 10% for straight plank, 12% for regular tile and 15% for large-format tile, and adds 5 points for a diagonal layout and 10 for herringbone or chevron. These are planning defaults, not a rule: small rooms, many corners and patterned tile need more, and big open rectangles need less. Your installer's number after measuring is the one to order.
Keep the leftover boxes. A damaged plank or cracked tile is far easier to replace from the same production lot than to match years later, which matters in Florida, where water and sun damage are the usual reasons for a repair. See floor repair for how single boards and tiles get swapped.
What else to plan for on a Florida slab
Most homes here are slab-on-grade, so two checks come before any boxes are opened: a moisture test of the concrete and a flatness check. Moisture decides the vapor barrier or underlayment, and flatness decides whether the slab needs grinding or self-leveling first. The best flooring for concrete slab homes guide covers both, and acclimating flooring in Florida covers how long the boxes should sit in the house.
What will it cost?
Multiply the "to buy" square footage by the per-square-foot ranges on each service page: vinyl plank, laminate, hardwood and tile. Removal of the old floor, slab prep and trim are separate line items in every Triangle Flooring quote. New-floor measurements are free, with an itemized written quote within 24 hours. Request a measurement.
Flooring Calculator FAQ
Do I measure the room or the floor I can see?
Measure wall to wall at floor level, then subtract fixed things the new floor will not go under, such as kitchen cabinets and islands. Include closets and the space under freestanding furniture, because the floor goes there too.
Why does a herringbone floor need so much more material?
Every plank in a herringbone or chevron layout meets a wall at an angle, so far more ends are cut off and can't be reused. Diagonal tile has the same problem at every wall. That is why the calculator adds extra waste for those layouts.
Should I round up to a full box?
Yes. Stores rarely split boxes, and running short mid-job can mean a different production lot with a slightly different color. The calculator already rounds up.
How do I count quarter round or baseboard?
Add up the length of every wall the new floor touches, then subtract doorways and openings. The calculator uses the room perimeters you entered, subtracts about 3 feet per opening, adds 10% for miter cuts and divides by 8-foot pieces.
Last verified: November 17, 2026.